At a glance Material data

image_pdfPDF
Material Daten/Material propertiesMOIIN
Tech Clear		MOIIN
High Temp		MOIIN
Nano Rigid
MOIIN
Wax Cast		MOIIN
Model Grey 2.0		MOIIN
Tough Clear - Life		MOIIN
Flex Clear		MOIIN
Smart Clean		MOIIN
Easy Cast
Viskosität | Viscosity0,8 Pa*s0,7 Pa*s2,0 Pa*s0,7 Pa*s1,3 Pa*s4,3 Pa*s1,4 Pa*s
Dichte | Density
1,1 g/cm³1,154 g/cm³1,271 g/cm³1,082 g/cm³1,1 g/cm³1,06 g/cm³
Zugfestigkeit | Tensile strength at break63 MPa33,1 MPa71 MPa23 MPa0,67 MPa
E -Modul | Tensile Modulus (E-modulus)3600 MPa274,05 MPa0,62 MPa
Biegefestigkeit | Flexural Stress at Break90 MPa87 MPa150 MPa27 MPa114 MPa80 MPa
Biegemodul | Flexural Modulus2500 MPa2800 MPa5100 MPa1100 MPa2700 MPa2200 MPa
Dehnung bei Bruch | Elongation at Failure10 %5,1 %83 %123 %
Kerbschlagzähigkeit Izod (gekerbt) |
Izod impact strength (notched)		28 J/m23 J/m102 J/m
Shore A Härte | Shore A Hardness31.5
Shore D Härte | Shore D Hardness828790.664866280
Druckverformungsrest | Compression Set0,73 %0,15 %
Wärmeformbeständigkeitstemperatur A (1,8 MPa) | HDT A (1,8 MPa)124 °C118 °C69 °C
Wärmeformbeständigkeitstemperatur B (0,45 MPa) | HDT B (0,45 MPa)230 °C88 °C
Hitzebeständigkeit | Heat resistance134 °C
Ascherückstand | Ash Residue0,09 %0 %
Temperatur bei 95 Gew.-% | Temperature (95%-w)285 °C
Wasseraufnahme | Water pick-up28,1 µg/mm315,5 µg/mm3
Wasserlöslichkeit | Water solubility0,7 µg/mm35,9 µg/mm324 g/L
Lösungsmittelverträglichkeit (1 cm³-Würfel, 24 h Lagerung, Gewichtszunahme) | solvent compatibility (1 cm³ cube, 24 h storage, weight increase) :
Wasser | water0,18 %0,15 %0,16 %0,22 %0,53 %
Cyclohexan | Cyclohexane<0,01 %<0,01 %0,03 %0,47 %0,08 %
Lauge (1 mol/L NaOH) | Base (1 mol/L NaOH)0,16 %0,15 %<0,01 %0,19 %0,51 %
Salzwasser (4% NaCl) | Salt Water (4% NaCl)0,17 %0,14 %0,13 %0,21 %0,53 %
Isopropylalkohol | Isopropyl alcohol<0,01 %<0,01 %<0,01 %2,9 %5,70 %
starke Säure (konz. HCL) | strong acid (conc. HCL)0,27 %0,14 %0,23 %2,03 %
Benzin | petrol<0,01 %<0,01 %0,10 %
UV-Lichtbeständigkeit (24 Stunden in Wasser | UV light resistance (24 h exposure in water) :
E- Modul | Tensile Modulus (E-modulus)0,72 MPa
Zugfestigkeit | Tensile strength at break1,41 MPa
Dehnung bei Bruch | Elongation at Failure170,80 %
UV-Lichtbeständigkeit (1 Woche 60 °C) | UV light resistance (1 week 60 °C) :
E- Modul | Tensile Modulus (E-modulus)0,62 MPa
Dehnung bei Bruch | Elongation at Failure169,83 %
Zugfestigkeit | Tensile strength at break1,26 MPa
Schrumpfung | Shrinkage0,65 %
Eindringstiefe DP @ 7,6 mW/cm²; 385 nm | Penetration Depth DP @ 7,6 mW/cm²; 385 nm0,066 mm (@ 5 mW/cm²)0,085 mm0,152 mm0,17 mm (@ 1 mW/cm²)0,079 mm (@ 5 mW/cm²)0,15 mm0,11 mm0,13 mm @ 6,7 mW/cm²
Kritische Energie EC @ 7,6 mW/cm²; 385 nm |
Critical Energy EC @ 7,6 mW/cm²; 385 nm		4,8 mJ/cm² (@ 5 mW/cm²)3,5 mJ/cm²2,8 mJ/cm²4,1 mJ/cm² (@1 mW/cm²)2,3 mJ/cm² (@ 5 mW/cm²)6,0 mJ/cm²2,66 mJ/cm²3,8 mJ/cm² @ 6,7 mW/cm²
Eindringstiefe DP @ 10 mW/cm²; 405 nm | Penetration Depth DP @ 10 mW/cm²; 405 nm0,16 mm (@ 5,1 mW/cm²)0,18 mm (@ 14 mW/cm²)0,277 mm @ 5,4 mW/cm²0,2 mm (@ 1 mW/cm²)0,13 mm (@ 5,1 mW/cm²)0,13 mm0,11 mm0,19 mm
Kritische Energie EC @ 10 mW/cm²; 405 nm |
Critical Energy EC @10 mW/cm²; 405 nm		11,9 mJ/cm² (@ 5,1 mW/cm²)7,6 mJ/cm² (@ 14 mW/cm²)5,8 mJ/cm² (@5,4 mW/cm²)6,17 mJ/cm² (@1 mW/cm²)4,7 mJ/cm² (@ 5,1 mW/cm²)6,0 mJ/cm²6,5 mJ/cm²5,5 mJ/cm²
Autoklavierbarkeit (134°C, H2O, 5 min) | Autoclavability (134°C, H20, 5 min)min. 1x
Biokompatibilität* analog zu DIN EN ISO 10993 | Biocompatibility* analogous DIN EN ISO 10993nicht zytotoxisch, nicht sensibilisierend, nicht reizend | non-cytotoxic, non-sensitizing, non-irritant
Biologisch abbaubar | Biodegradable97 % (4d)
Flammpunkt | Flash point113 °C
Dampfdruck | Vapour pressure0,08 hPa
Siedebeginn und Siedebereich | Initial boiling point and boiling range227-230 °C

*Alle Materialien der MOIIN Life Series sind nach hohen Qualitätsstandards in einem nach ISO 13485 zertifizierten Unternehmen hergestellt.
Die von uns durchgeführten Biokompatibilitätsprüfungen wurden für einen konkreten Anwendungsfall durchgeführt und stellen keine pauschale Gewährleistung dar.
Sie dienen lediglich einer Orientierung, dass die mit den MOIIN Life Series Materialien hergestellten Druckobjekte im Bereich Life Science nach den jeweils für den Zweck durchgeführten speziellen Tests potenziell eingesetzt werden können.
Wir weisen darauf hin, dass es in der Verantwortung der Inverkehrbringer der gedruckten Objekte liegt, den medizintechnischen Zweck der jeweiligen Anwendung zu bestimmen, zu klassifizieren und gegebenenfalls zu zertifizieren.
*All MOIIN Life Series materials are manufactured to high quality standards in an ISO 13485 certified company. The biocompatibility tests carried out by us were carried out for a specific application and do not represent a blanket warranty. They only serve to provide guidance on the potential use of printed objects produced with MOIIN Life Series materials in the life science sector, according to the specific tests carried out for the respective purpose. We would like to point out that it is the responsibility of the distributors of the printed objects to determine, classify and, if necessary, certify the purpose of the medical device for the relevant application.

*All MOIIN Life Series materials are manufactured to high quality standards in an ISO 13485 certified company. The biocompatibility tests carried out by us were carried out for a specific application and do not represent a blanket warranty. They only serve to provide guidance on the potential use of printed objects produced with MOIIN Life Series materials in the life science sector, according to the specific tests carried out for the respective purpose. We would like to point out that it is the responsibility of the distributors of the printed objects to determine, classify and, if necessary, certify the purpose of the medical device for the relevant application.

At a glance Printer compatibility

Our materials are basically designed for open systems.
Supported printer technologies are DLP, SLA and LCD with 385 or 405 nm wavelength. In this overview, we have collected our experiences with different printer systems for you.

Moiin_Resin_Wax_Cast_3D_Liquid-1200
Druckerkompatibilität / Printer CompatibilityMOIIN
Tech Clear		MOIIN
High Temp		MOIIN
Nano Rigid
MOIIN
Wax Cast		MOIIN
Model Grey 2.0		MOIIN
Tough Clear - Life
MOIIN
Flex Clear		MOIIN
Easy Cast
ASIGA (weitere Infos auf https://www.asiga.com/products/materials/)
MiiCraft (weitere Infos auf www.burms.de/pages/kontakt)
Genera (weitere Infos auf www.genera3d.com)
Rapidshape (weitere Infos über moiin@mtcompanies.com)
Anycubic Photon S​16,0 s (50 µm)16,0 s (50 µm); 21,0 s (100 µm)
Anycubic Photon Mono​5,3 s (50 µm)4,0 s (50 µm)5,3 s (100 µm)8,0 s (100 µm)4,0 s (50 µm); 5,3 s (100 µm)12,0 s (100 µm)10,7 s (50 µm)
Anycubic Photon Mono X​5,3 s (50 µm)5,0 s (50 µm)5,3 s (100 µm)8,0 s (100 µm)5,0 s (50 µm); 5,3 s (100 µm)12,0 s (100 µm)2,7 s (50 µm)
Anycubic Photon Mono X 6K​5,3 s (50 µm)6,0 s (50 µm)5,3 s (100 µm)8,0 s (100 µm)6,0 s (50 µm); 5,3 s (100 µm)12,0 s (100 µm)2,7 s (50 µm)
Anycubic Photon Mono 4K​5,3 s (50 µm)7,0 s (50 µm)
5,3 s (100 µm)8,0 s (100 µm)7,0 s (50 µm); 5,3 s (100 µm)12,0 s (100 µm)
2,7 s (50 µm)
Anycubic Photon Ultra​5,3 s (50 µm)8,0 s (50 µm)5,3 s (100 µm)8,0 s (100 µm)8,0 s (50 µm); 5,3 s (100 µm)12,0 s (100 µm)2,7 s (50 µm)
Anycubic Photon Mono SE​4,0 s (50 µm)3,0 s (50 µm)4,0 s (100 µm)6,0 s (100 µm)3,0 s (50 µm); 4,0 s (100 µm)9,0 s (100 µm)2,7 s (50 µm)
Anycubic Photon Mono SQ​6,1 s (50 µm)4,6 s (50 µm)
6,1 s (100 µm)9,2 s (100 µm)
4,6 s (50 µm); 6,1 s (100 µm)14,0 s (100 µm)
2 s (50 µm)
Anycubic Photon M3​5,3 s (50 µm)7,0 s (50 µm)5,3 s (100 µm)
8,0 s (100 µm)7,0 s (50 µm); 5,3 s (100 µm)12,0 s (100 µm)3,1 s (50 µm)
Anycubic Photon M3 Plus​4,0 s (50 µm)3,0 s (50 µm)4,0 s (100 µm)6,0 s (100 µm)3,0 s (50 µm); 4,0 s (100 µm)9,0 s (100 µm)2,7 s (50 µm)
Anycubic Photon M3 Max​8,0 s (50 µm)6,0 s (50 µm)8,0 s (100 µm)
12,0 s (100 µm)6,0 s (50 µm); 8,0 s (100 µm)18,0 s (100 µm)2 s (50 µm)
Phrozen Sonic Mini17,0 s (50 µm)7,0 s (50 µm)11,5 s (50 µm)8,0 s (50 µm)9,0 s (50 µm); 12,0 s (100 µm)4 s (50 µm)
Phrozen Sonic Mini 4K17,0 s (50 µm)7,0 s (50 µm)11,5 s (50 µm)8,0 s (50 µm)9,0 s (50 µm); 12,0 s (100 µm)4 s (50 µm)
Phrozen Sonic Mini 8K17,0 s (50 µm)7,0 s (50 µm)11,5 s (50 µm)8,0 s (50 µm)9,0 s (50 µm); 12,0 s (100 µm)4 s (50 µm)
Phrozen Sonic Mighty 4K17,0 s (50 µm)7,0 s (50 µm)11,5 s (50 µm)8,0 s (50 µm)9,0 s (50 µm); 12,0 s (100 µm)4 s (50 µm)
Phrozen Sonic Mighty 8K17,0 s (50 µm)7,0 s (50 µm)11,5 s (50 µm)8,0 s (50 µm)9,0 s (50 µm); 12,0 s (100 µm)4 s (50 µm)
Phrozen Sonic Mega 8K20,0 s (50 µm)8,2 s (50 µm)13,5 s (50 µm)9,5 s (50 µm)10,5 s (50 µm); 12,0 s (100 µm)4,7 s (50 µm)
ELEGOO Mars16,0 s (50 µm)19,0 s (50 µm)18,0 s (50 µm); 21,0 s (100 µm)28,0 s (50µm)22 s (100 µm)14,0 s (100 µm)10 s (50 µm)
ELEGOO Mars Pro14,0 s (50 µm)17,0 s (50 µm)15,0 s (50 µm); 18,0 s (100 µm)25,0 (50µm)20 s (100 µm)14,0 s (100 µm)9 s (50 µm)
ELEGOO Mars 2 Pro/Mars 25,0 s (50µm)6,0 s (50 µm)5,5 s (50 µm); 6,5 s (100 µm)9,0 s (50 µm)7 s (100 µm)14,0 s (100 µm)25 s (100 µm)3 s (50 µm)
ELEGOO Saturn/Saturn S5,0 s (50µm)6,0 s (50 µm)5,5 s (50 µm); 6,5 s (100 µm)9,0 s (50 µm)7 s (100 µm)14,0 s (100 µm)25 s (100 µm)3 s (50 µm)
ELEGOO Mars 3/Mars 3 Pro5,0 s (50µm)6,0 s (50 µm)5,5 s (50 µm); 6,5 s (100 µm)9,0 s (50 µm)7 s (100 µm)14,0 s (100 µm)25 s (100 µm)3 s (50 µm)
ELEGOO Saturn 25,0 s (50µm)6,0 s (50 µm)5,5 s (50 µm); 6,5 s (100 µm)9,0 s (50 µm)7 s (100 µm)14,0 s (100 µm)25 s (100 µm)3 s (50 µm)
ELEGOO Jupiter5,0 s (50µm)6,0 s (50 µm)5,5 s (50 µm); 6,5 s (100 µm)9,0 s (50 µm)7 s (100 µm)14,0 s (100 µm)25 s (100 µm)3 s (50 µm)