MOIIN
Tough Clear

For the creation of tough yet flexible functional objects in 3D printing

Tough or elastic? In the case of MOIIN Tough Clear, the answer is: both!
The printed objects feature high impact strength, while at the same time being flexible, stretchable and not brittle. MOIIN Tough Clear is therefore ideally suited for the production of objects that are subject to high mechanical stress. Thanks to the finely balanced modulus of elasticity, the parts remain dimensionally stable even under extreme stresses, such as those caused by dropping or impact – this makes it ideal for robust functional prototypes and tools, special seals, numerous research devices and much more. Objects printed in MOIIN Tough Clear are also biocompatible* and can therefore also be used in various medical engineering areas, such as for hearing aids, glasses, shoe inserts or orthoses. By varying the structure and thickness of the material, it is possible to print more flexible or firmer parts to suit your needs. The printed objects also have impressively smooth, transparent surfaces.

Sectors

  • Design
  • EDUCATION & SCIENCE
  • INDUSTRIAL MANUFACTURING
  • MEDICAL TECHNOLOGY

USES

  • ENGINEERING TECHNOLOGY
  • PRODUCT DESIGN
  • FUNCTIONAL TOOLS
  • ROBUST FUNCTIONAL PROTOTYPES
  • PRODUCTION EQUIPMENT AND SUPPORTS/BRACKETS
  • LAB OR RESEARCH EQUIPMENT
  • MEDICAL ENGINEERING TOOLS
  • FLUIDICS
  • FLEXIBLE ARTICULATIONS

Material properties

Material PropertiesValue
Viscosity1,3 Pa·s
Tensile Strength at Break23 MPa
Tensile Modulus274 MPa
Elongation at Failure83%
Izod Impact Strength (notched)102 J/m
Shore Hardness (Scale D)62
Water pick-up15,5 µg/mm3
Water solubility5,9 µg/mm3
solvent compatibility (1 cm³ cube, 24 h storage, weight increase)water 0,22
Cyclohexane 0,47
strong acid (conc. HCL) 2,03
Base (1 mol/L NaOH) 0,19
Salt Water (4% NaOH) 0,21
Isopropyl alcohol 2,9
Biocompatibility analogous DIN EN ISO 10993non-cytotoxic, non-sensitizing, non-irritant

Please visit technical data page for an up-to-date table with further product data and printer compatibilities for all MOIIN Resins.

Material with additional value

High impact strengthPliable and flexibleDimensionally stableExcellent elastic recoveryImpact resistantExcellent detail reproductionModerate elongationStructural versatility: By varying the structures, it is possible to print parts with greater flexibility or rigidityCan be disinfectedGood chemical resistanceBiocompatible*

*All MOIIN Life Series materials are manufactured to high quality standards in an ISO 13485 certified company. The biocompatibility tests carried out by us were carried out for a specific application and do not represent a blanket warranty. They only serve to provide guidance on the potential use of printed objects produced with MOIIN Life Series materials in the life science sector, according to the specific tests carried out for the respective purpose. We would like to point out that it is the responsibility of the distributors of the printed objects to determine, classify and, if necessary, certify the purpose of the medical device for the relevant application.

Buy now